My name is Ron and I live in Celina, Texas. Been an imager for a long time using ACP. I am happy to report the Pat M's latest Github plays well with ACP as the client. Mount and Dome danced together for the first time nicely tonight. Version 05.2.3 PDMRotator, PDMShutter, and ASCOM PDMDome0523Setup. I am unclear about the voltage setting in the setup tool. My controller drops to very low voltage when not active (rotator) and unless I set low voltage threshold to something like 5.8 ACP will disconnect from too low voltage. I'll try a different power supply for the rotator..
The Rotator compiled clean. The shutter uploaded but complained of missing items. Now that the Dome itself might actually be ACP-ready chasing down the shutter is next priority. Any obvious gotchas folks know about pass my way. Pat!! I'd love to have a good way to interact with you about this. I did re-up Facebook just for the NexDome group but all my IT friends say to stay away. I'll do what I need to do to get all of this talking well! I'm really excited to have the Dome, find this group, and watch it track objects as a slave to ACP.
Ok, This is the schematics for that part :
On the board picture, R1 is on the right, R2 on the left and R3 in the middle.
You should get about 4V between GND and VPIN (12v /3 = 4v).